Motorcycle Engine Heater

Honda ST1300

 

Engine experts say up to 80% of the wear in your engine occurs during the first 2 minutes after starting.  Cold oil doesn't pump as well as warm oil, and bearing and other tolerances are not at operating dimensions until the engine warms up.  Preheating the oil means lubrication on start-up will be improved, thereby reducing wear and tear on your engine and extending its life.

Aircraft owners have known this for years.  We are the manufacturer of the world's leading electric preheating systems for aircraft engines, helping aircraft owners to extend the life of their expensive engines, which are often worth $30-40,000 or more.  Now motorcycle owners can get the same benefits.

This heater has been installed on our Honda ST1300 and Sabre 1100.  It will also fit any other motorcycle or engine (car, truck, ATV, boat, snowmobile, snowblower, etc) on which there is a suitable area on or near the oil pan to mount the 4" x 1.5" heater.  This surface can be either horizontal or vertical but must be flat and smooth (no ribs, etc.).

Installation is simple... 

Clean and scuff the engine surface, mix the epoxy and spread it evenly on the heater, press heater onto the engine, tape heater down tightly with duct tape, and let it cure.  That's all there is to it. 

Home | Main Page | Contact Us | Order Info